冬季，汽車保養必不可少。如果汽車入冬前不做相應的保養，會產生十分嚴重的磨損，相當于正常保養下多跑幾年的磨損量。怎樣才能為愛車選擇合適的潤滑油產品?濟南沃爾沃汽車維修哪家好給您幾點建議：

In winter, car maintenance is essential. If the car is not maintained before winter, it will cause very serious wear, which is equivalent to the amount of wear for several years under normal maintenance. How can I choose the right lubricant for my car? Which one is better for Jinan Volvo Cars to repair

冬夏通用機油為:

The general engine oil in winter and summer is:

選擇潤滑油應根據發動機的要求進行選擇，既不能在要求較低的發動機上使用過于高級的機油，也不能將較低級的機油使用在要求較高的發動機上。

The selection of lubricating oil should be based on the requirements of the engine. Neither too high grade oil can be used on the engine with lower requirements, nor can the lower grade oil be used on the engine with higher requirements.

應盡量選擇冬夏通用機油。通用機油無論溫度如何變化都能保持較穩定的潤滑性能，對發動機起到較好的保護作用。

Winter and summer universal oil should be selected as far as possible. No matter how the temperature changes, the universal oil can maintain a relatively stable lubricating performance and play a better role in protecting the engine.

視發動機的狀況選擇。如果發動機是新的或者狀況良好的，應舊能使用黏度較低的機油，比如0W-40、5W-40和10W-40等，以使?jié)櫥偷牧鲃?dòng)更快，減少啟動時的磨損。

Select according to the condition of the engine. If the engine is new or in good condition, oil with low viscosity, such as 0W-40, 5W-40 and 10W-40, should be used to make the lubricating oil flow faster and reduce the wear during startup.

如果是在高溫季節或發動機已經磨損到一定程度的，就要選用高黏度的機油，比如15W-50等，這樣有利于形成較厚的油膜，維持機油的壓力，并減少機油消耗。

If it is in the high temperature season or the engine has been worn to a certain extent, it is necessary to select the oil with high viscosity, such as 15W-50, which is conducive to forming a thicker oil film, maintaining the pressure of the oil and reducing the oil consumption.

添加量不要過多:

Do not add too much:

機油添加量并不是越多越好。如果潤滑油過多，會增加曲軸的轉動阻力，降低發動機的輸出功率，并且那些過量機油會躥入燃燒室燃燒，造成車輛燒機油，冒藍煙，以至于油耗增加。機油燃燒后的殘留物會積聚在燃燒室壁上，減少燃燒室空間，從而降低引擎的壓縮比。

The more oil you add, the better. If there is too much lubricating oil, it will increase the rotational resistance of the crankshaft, reduce the output power of the engine, and the excessive oil will jump into the combustion chamber for combustion, causing the vehicle to burn oil, emit blue smoke, and increase fuel consumption. The residue after oil combustion will accumulate on the combustion chamber wall, reducing the combustion chamber space and thus reducing the compression ratio of the engine.

同時，也會加速汽缸與活塞的磨損，從而降低車輛的使用壽命。所以，東坑奔馳保養建議在添加潤滑油的時候，一定要保持略低于機油尺高刻度為宜;另外還要掌握機油的型號、換油的季節、發動機性能等諸多因素。

At the same time, it will also accelerate the wear of cylinder and piston, thus reducing the service life of the vehicle. Therefore, Dongkeng Benz maintenance suggests that when adding lubricating oil, it should be kept slightly lower than the high scale of the oil dipstick; In addition, it is necessary to master many factors such as the model of oil, the season of oil change, engine performance, etc.

秋冬季節氣溫下降比較明顯，普通潤滑油產品在氣溫低的情況下則變得更稠，流動性減弱，達到需要潤滑部位的時間加長，致使車輛不易啟動且磨損加大。所以秋冬時節，選擇基礎油黏度孝傾點低的潤滑油產品，這樣才能對汽車引擎持續帶來良好的潤滑作用。更多相關內容就來我們網站進行http://www.nikond90.cn咨詢！

The temperature drop in autumn and winter is relatively obvious, and the ordinary lubricating oil products become thicker under the low temperature, the fluidity is weakened, and the time to reach the parts requiring lubrication is prolonged, which makes it difficult to start the vehicle and increases the wear. Therefore, in autumn and winter, select lubricating oil products with low viscosity and pour point of base oil, so as to continuously bring good lubrication effect to the automobile engine. Come to our website for more relevant content http://www.nikond90.cn consulting service