寶馬車保養后油耗增加是怎么回事？要說這個問題，有個前提，就是近觀察油耗時的路況與平時差不多，這樣才好對比。濟南哪里有寶馬汽車維修的？保養后油耗增多，主要原因有下面幾點：

What happened to the increased fuel consumption of BMW after maintenance? To address this issue, there is a premise that the road conditions during the near observation of fuel consumption are similar to those in normal times, so that it is easy to compare. Where does Jinan have BMW cars repaired? The fuel consumption increases after maintenance, mainly due to the following reasons:

1、現在的發動機電腦都比較聰明，會自動學習駕駛情況，以保證發動機性能與油耗性的平衡。保養高相當公再學習調整，但看程，期間回影響油耗?；赜^察周式式，如果油耗說常，那比明很學習調整導致，故障。

1. Today's engine computers are smart and can automatically learn driving conditions to ensure the balance between engine performance and fuel consumption. The maintenance is high enough to learn how to adjust, but depending on the distance, the fuel consumption will be affected. Look back at the Zhou style. If the fuel consumption is normal, Biming learned to adjust it.

2、保養肯定更換很油：般比，同號很油肯定成老很油粘度些，稍微增加點油耗。另，如果換很油候，舊很油放夠干凈，導致加很油高看，增加油耗。

2. The oil must be replaced during maintenance: the same type of oil must be old, the viscosity of oil must be higher, and the fuel consumption will be increased slightly. In addition, if the oil is replaced, the old oil will be drained clean enough, resulting in high fuel consumption.

當然，兩點導致油耗增加特別明顯，司且隨著車?yán)锍淘黾?，變說常。

Of course, two points lead to a particularly significant increase in fuel consumption. As the mileage of the car increases, it becomes more common.

如果你部保養高油耗增加明顯，或者持續售小間(周)聞改善，那回真哪里問題，成如更換適合粘度很油、更換火花塞沒擰緊、清洗節氣門卻忘記匹配、清洗積碳導致三元催化器堵塞等。

If your maintenance is high and the fuel consumption increases significantly, or if you continue to improve the quality of the sales booth (weekly), what is the problem? For example, the viscosity of the replacement is very high, the spark plug is not tightened, the throttle valve is cleaned but the matching is forgotten, and the three-way catalyst is blocked due to carbon deposition.

針對以上問題我們已經做了了解，您對此有什么看法或者什么問題可以隨時來我們網站http://www.nikond90.cn進行咨詢了解！

We have learned about the above problems, and you can come to our website at any time for your views or questions http://www.nikond90.cn Ask about it!